GEORG FISCHER 2540
The 2540 series stainless steel insertion paddlewheel flow sensors are the highest specification for higher pressure and temperature applications.
Suitable for Low Flow velocity applications.
Unique internal circuitry eliminates the need for magnets in the process fluid, enabling flow measurement of 0.1 to 6 m/s (0.3 to 20 ft/s) while maintaining the advantages of insertion sensor design.
Ultraflon 500C bearings and Tungsten Carbide pin provide exceptional wear resistance.
A hot-tap version is possible for processes where flow cannot be stopped to service or replace the flowmeter.
The 2540 sensors are to be used with the following controllers or transmitters:
- 8900 Controller for up to 6 Channels , such as Flow, pH, temp, pressure, level, ORP and conductivity; panel mount
- 9900 Display Transmitter, for either Panel / Field mount or Integral mount directly onto the sensor
Contact ADM's technical sales team to help select a package for you.
Individual components also available as spare parts
Can’t find what you need?
Call ADM on 1300 236 467
A member of our expert team will gladly help you find the right solution for your project or application.