Han Crimp Contact 16A Female 1sq.Mm AWG18

The HARTING 09330006205 Han E F Crimp Contact Ag 1.0 mm²/18 AWG is the female (socket) crimp contact for the HARTING Han E® connector system, sized for 1.0 mm² (AWG 18) conductors — the finest conductor size in the Han E silver crimp contact range. It is the direct mating counterpart to the Han E M Crimp Contact Ag 1.0 mm² (09 33 000 6105), completing the contact pair for 1.0 mm² Han E crimp circuits.

This contact is manufactured using a turned contact process — precision-machined from copper alloy bar stock — and carries an ECHA SCIP registration number, reflecting the more detailed compliance documentation associated with its 2021 datasheet revision. California Proposition 65 disclosures are also included, consistent with the Lead content of the copper alloy material.

Turned Contact Manufacturing

Unlike stamped or formed contacts produced from sheet metal, turned contacts are precision-machined from solid copper alloy bar stock on a lathe. This manufacturing process produces tighter dimensional tolerances and more consistent contact geometry, which translates to repeatable insertion force, reliable spring contact force in the socket, and consistent contact resistance across production batches. The turned contact designation is explicitly listed in this product's datasheet and distinguishes it from contacts produced by stamping processes.

Female Socket for 1.0 mm² Circuits

The female socket contact receives the male pin (09 33 000 6105) on mating, providing the spring clamping force that maintains ≤1 mΩ contact resistance across a rated minimum of 500 mating cycles. The 1.0 mm² / AWG 18 conductor size makes this contact well suited to low-current signal, sensor, and instrumentation circuits within a Han E mixed-wiring assembly — positions where conductor weight and bend radius are priorities alongside current capacity.

Groove Identification

The groove system identifies conductor size consistently across male and female contacts:

- **3 grooves** — 2.5 mm² / AWG 14 (09 33 000 6202 female / 09 33 000 6102 male)
- **2 grooves** — 1.5 mm² / AWG 16 (09 33 000 6204 female / 09 33 000 6104 male)
- **1 groove** — 1.0 mm² / AWG 18 (this product / 09 33 000 6105 male)

Verify groove count before inserting any contact into the insert body. A 1-groove female always mates with a 1-groove male.

Crimp Termination

Stripping length is 7.5 mm. Use a calibrated crimp tool with the correct die for 1.0 mm² / AWG 18 conductors to achieve a gas-tight, vibration-resistant, permanent joint.

Electrical Ratings

- Operating current: ≤16 A
- Contact resistance: ≤1 mΩ
- Mating cycles: ≥500
- Conductor cross-section: 1.0 mm² / AWG 18
- Stripping length: 7.5 mm
- Standards: EN 60664-1, IEC 61984

Materials

Contact body and socket are copper alloy with a silver-plated surface. Silver plating provides low, stable contact resistance and resistance to oxidation over the service life of the connector.

Compliance

RoHS compliant with exemption 6(c) — copper alloy contacts containing up to 4% lead by weight. ELV compliant with the same exemption. REACH SVHC substance Lead is present (inherent to the copper alloy); REACH Annex XIV and Annex XVII substances are not contained. China RoHS: 50. ECHA SCIP number: b51e5b97-eeb5-438b-8538-f1771d43c17d. California Proposition 65: Lead is present. Manufactured in Germany.