Intrinsically safe submersible accelerometer 4-20mA output for PLC interface ATEX & IECEx Group II approved

The Monitran MTN/1187IW is an ATEX & IECEx Group II approved, top-entry, submersible, accelerometer designed for continuous vibration monitoring in harsh underwater environments and areas with constant moisture or condensation. Built entirely from stainless steel and sealed to IP68, it delivers a two-wire 4–20 mA DC output proportional to sensor range. Due to its output signal, the sensor can directly be connected to PLCs, DCS systems, and other industrial controllers without the need for additional signal conditioning. The sensor comes with an integral heavy duty polyurethane cable and is available with a wide range of mountings.

The transducer covers a frequency response of 2 Hz to 1 kHz (±10%) with a dynamic range of 50g peak and transverse sensitivity of less than 5%. Base isolation is included as standard, mounted base resonance is 5 kHz, and temperature sensitivity is just 0.08%/°C across an operating range of −25°C to +90°C. An integral polyurethane cable which is braided over with stainless steel ETFE cable is supplied as standard at 5 m, with a maximum cable run of 100 m. Supply voltage is 12–32 V DC. Weight is approximately 150 g.

The sensor comes with two mounting configurations  — ¼" UNF Female, and Quick-Fit Female — each offered across five velocity ranges. A wide range of mounting studs, quick-fit adapters, mounting adapters, and isolation adapters is also available separately.

Typical applications include: Intrinsically safe data collector, Oil and mining, Submersible pumps, fans and compressors

MTN/1187IW is approved for Group II BAS02ATEX1057X and IECEx BAS 08.0013X Ex ia IIC T6 Ga (-55C <= Ta <= +65C) Ex ia IIIC T85C Da (-55C <= Ta <= +65C) 

MTN/1187IW — ¼" UNF Female mounting: MTN/1187W-xx  (xx = Optional Velocity)

MTN/1185IW-10 (0–10 mm/s)

MTN/1185IW-20 (0–20 mm/s)

MTN/1185IW-25 (0–25 mm/s)

MTN/1185IW-50 (0–50 mm/s)

MTN/1185IW-100 (0–100 mm/s)

MTN/1185IWQ — Quick-Fit Female mounting: MTN/1185WQ-xx  (xx = Optional Velocity)

MTN/1185IWQ-10 (0–10 mm/s)

MTN/1185IWQ-20 (0–20 mm/s)

MTN/1185IWQ-25 (0–25 mm/s)

MTN/1185IWQ-50 (0–50 mm/s)

MTN/1185IWQ-100 (0–100 mm/s)