UniMeasure JX-PA Series

Linear position transducer - ratiometric output - 50mm to 2000mm travel
UniMeasure JX-PA

The UniMeasure JX-PA series draw wire transducer with analogue output is ideal for use in moderate duty applications, in wet or dry environments. The chemical resistant thermoplastic case provides optional IP-65 ingress protection for applications where exposure to washdown, rain, oil and other liquids may occur. An integral dust wiper insures that the wire rope stays clear of debris as it is extracted and retracted. Electrical connection options include body mounted sealed plastic connector with mating connector, or a sealed bulkhead fitting and three conductor electrical cable of user specified length. If the connector with mating connector option is chosen, the mating connector is available with or without electrical cable attached. For installation convenience, optional connector locations on the transducer body are available on request. The wire rope exit direction may also be specified at time of ordering or may be user adjusted at time of installation.

Can’t find what you need?

Call ADM on 1300 236 467

A member of our expert team will gladly help you find the right solution for your project or application.